one. The aluminum cutting machine must ensure the stability of the power supply. Any electronic equipment has requirements in this regard. The instability of the power supply often leads to the unstable operation of the equipment f, which will destroy the performance of the machine in the long run, and even burn the main board or power board. .

  two. The data cable interface should be connected well and firmly, and the data cable should be placed so that it cannot be pulled or kicked, otherwise it may malfunction or even burn.

  three. It is necessary to regularly dust the equipment and clean it regularly, usually once every one to two weeks.

  Four. Do not overuse the velvet bead under the pressure roller, because the deep groove will not only have a bad cutting effect (especially at the corner), but also cause damage to the tip of the knife, accelerate the wear of the knife cap, and cause noise.

  Fives. The parameters of the knife and pen should be adjusted well. If the pressure is too large and the speed is too fast, if you do not pay attention to use, it is easy to bring some small problems, such as grabbing the pen and alarming, crashing and so on. Therefore, it should be appropriate, and pay attention to adjusting the parameters when replacing the material.

  six. Before shutting down the machine, you should exit all programs, clear the output content, and do not force the power off.

  seven. The tablet machine should pay attention to protect the electrostatic plate surface from being scratched, otherwise it will destroy the electrostatic adsorption or even fail.

  Eight. When the machine has a minor fault, it should be solved in time. For some simple problems, we can consult and solve it on the phone without on-site service, which saves costs for customers. Prolonged time for minor faults can easily cause other problems, and even burn out the motherboard, etc., so we must consult in time. solve.

  Nine. Some users replace some fake parts by themselves. The effect seems to be ok at first glance, but it will be different after a long time. After buying it, it is not necessary to replace it. As a result, it brings more other problems. We all know that precision equipment is very important for overall matching. If you are particular about electronic equipment imported from Japan, if you use fake accessories for a long time, it will cause the instability of the equipment and greatly shorten its service life, which is not worth the loss. Usually pay attention to maintenance, use good spare parts or consumables when needed, in order to ensure the good operation of the equipment.

Industrial aluminum profiles are long profiles with cross-sections extruded by a die. The length of industrial aluminum profiles is generally controlled at 6.02 meters. Users need to process and cut industrial aluminum profiles into appropriate lengths according to their own needs before use. Zhuangxiong, an industrial aluminum profile processing manufacturer, will briefly introduce some points that need to be paid attention to when processing and cutting aluminum profiles!

1. The so-called workers must first sharpen their tools if they want to do good things. When cutting industrial aluminum profiles, the saw blade of the cutting tool is a point to pay attention to. Sharp and precise geared saw blades should be selected, and the saw blades should be replaced frequently. Because the saw blade will wear in the process of cutting aluminum profiles, if the saw blade is not replaced in the later stage, the section of the cut aluminum profile will be uneven and there will be burrs.

2. It is not possible to directly use the saw blade to cut aluminum profiles, and it is necessary to apply a certain amount of lubricating oil. In this way, the section of the aluminum profile cut out will be smooth and free of burrs. And reduce the damage to the saw blade during the cutting process.

3. When cutting, the aluminum profiles should be placed flat. If it is not placed properly, the section cut out of the profile will be uneven and the angles will not correspond, resulting in waste of aluminum profiles.

4. When cutting at special angles, such as bevel cutting, it is necessary to control the angle of the aluminum profile. In order to ensure the cutting accuracy, it is recommended to use a CNC sawing machine for cutting.